China Export Sisr/Ferro Silicon Alloy Inoculant in Casting Iron is a deoxidizer, which reduces oxygen content in the molten metal, thus improving its quality. I...

The best way to avoid metallurgical defects such as chill, dross formation and iron carbides is by using an effective inoculant. Our specialists will help you s...

A new inoculant based on quality ferro silicon and strontium is available for grey iron and ductile iron foundries. This highly effective inoculant reduces chil...

Inoculation with an inoculant containing the 0-25 and 0-45 mm grain size fraction results in lower pearlite contents than in uninoculated samples at the investi...

Inoculation is a metallurgical treatment that improves the nucleation ability of atoms in liquid cast iron. This is a critical step in the production of high qu...

A new inoculant was developed for reliably solidifying ferritic ductile iron with thin wall dimensions. The inoculant contains calcium but very little aluminum,...

Inoculating grades of ferro silicon with strontium provide much greater chill reduction per pound of alloy added than regular inoculants. This enables foundry t...

Ferro silicon is used to reduce metals from their oxides and deoxidize steel. It also prevents the loss of carbon from molten steel, and can be added to ferroma...

The addition of strontium greatly increases the inoculating power of a standard ferrosilicon in flake graphite grey iron or nodular graphite iron. This is a wel...

This inoculant is very powerful and gives high nodule count with powerful chill reduction,and reduces shrinkage tendency of the casting. It has a low oxide cont...