A modern highly effecttive inoculant mainly based on ferro silicon for grey and ductile iron foundries. It has high nucleating efficiency, less shaped residue and good casting performance.
It provides excellent chill reduction compared to all other inoculants. It also works well in ductile irons by reducing carbide formation and improving graphite structures.
YFAM is a new and advanced high performance patented inoculant based on quality ferro silicon for gray and ductile iron foundries. It contains up to 30 times the amount of active ingredient normally found in traditional ferrosilicon-based inoculants. This means that very small additions of YFAM can produce significant chill reduction, nodule counts and mechanical properties increases. It can be used as a ladle additive or in-stream inoculant. It also can be purchased as a tablet or pressed briquette (InocuBloc).
Strontium inoculants have the advantage that, unlike calcium inoculants, their sulfide substrates are very similar to graphite's. As such, they should be able to nucleate graphite more effectively than sulfide-forming inoculants that only contain calcium. This should help in reducing the chill phenomena and in improving the compactness and anti-capacity of cast irons. Also, strontium inoculants have the advantage that they can reduce the shrinkage defects of castings caused by insufficient inoculation. This makes them especially suitable for thin wall applications such as car parts and hydraulic pistons.
IM SR is one of the most effective nucleating agents available for cast irons. It is an all-ferosicon alloy which reacts with liquid iron to promote the formation of a fine Type A flake graphite. The low calcium level in IM SR ensures that it will go into solution with a minimum of dross formation, and it will perform at temperatures lower than traditional complex inoculants.
The Strontium content in IM SR is a significant factor that enhances its effectiveness. Strontium forms sulfides that have lattice parameters very similar to graphite. This unique property makes IM SR the most potent promotion element available in ferro-silicon inoculants for gray and ductile irons.
IM SR can be added as a ladle inoculant or used in conjunction with ASI’s InocuBloc inoculant tablets and pressed briquettes. In addition to its excellent nucleating properties, IM SR is also a powerful deoxidizer for grey and ductile irons. Using IM SR can reduce scrap rates, as well as improve the strength and machinability of your castings.
YFAM is a new inoculant for gray and ductile iron foundries. It contains a combination of high purity zirconium, barium and calcium with low levels of aluminum to minimize dross formation. It is designed to be added to the molten metal as an in-mold inoculant, but it also works well as a ladle addition.
This unique rare earth based innoculant is highly effective due to the precise rare earth content. It ensures chill free casting of grey & ductile iron.
This is a new, patented inoculant which incorporates the latest advances in contemporary inoculation concepts. Its ability to promote the formation of fine Type A flake graphite in gray and ductile iron melts is outstanding. Just fractional amounts of Sphere-O-Dox, typically 1/4 to 1/2 of traditional ferrosilicon based inoculants, can provide significant chill reduction and nodule count increases as well as mechanical property increases in both gray and ductile irons. It is available in tablets and pressed briquettes (InocuBloc).
With a sole aim of delivering quality products to our customers, we are the acclaimed Exporter, Manufacturer and Supplier of Ferro Silicon Strontium in Anyang, Henan, China. This product is a highly effective inoculant that can reduce scrap rates by producing strong, high-quality castings. It can also increase productivity, reduce labor costs and improve the overall quality of a finished cast iron product.
This inoculant consists of a mixture of calcium, barium and strontium. It remarkably reduces the chill phenomenon and generates little residue. It also possesses powerful recession-proof ability and can improve the compactness of castings.
It is widely used in water pressure and steam resistance gray cast iron, thin-walled or chilled sweet ash sulfur cast iron, and nickel ductile iron ball. It can also be used in other iron castings. It has a low amount of calcium and aluminum, which means less dross production compared to other inoculants. The chemical composition and size can be customized according to customer requirements.
English
Write a Message